TehnoTurg-T kauplus avatud E-R 10-17-ni!

NG-Mount antennialus FME pistikuga antennidele 4m kaabel RG58, FME-emane pistik Scan-Antenna

Saadavus: Tellimisel
Tarneaeg: 14 - 30 tööpäeva
KOOD
X69
30,00 €
Lisa soovinimekirja

NG-MOUNT (FME)

Mobile coaxial roof mount for non-conductive surface mounting

Mobile roof mount with integrated coaxial FME-male connector for non-conductive surface mounting of 1/2 λ portable antenna whips with FME-female connector.

NOTE: Not suitable for 1/4 λ antenna whips unless sufficient groundplane is being provided !

  • NON-CONDUCTIVE SURFACE MOUNTING
  • COAXIAL FME CONNECTION TO ANTENNA WHIP
Electrical Specifications:
Frequency0 - 2500 MHz
Impedance50 ohm
Mechanical Specifications:
ColorBlack
Diameter33 mm
MountingBolt-on (From inside or outside)
MaterialsABS, POM, PE, brass and steel
Operating temperature-40C to +70C
Connector 1See "ORDERING INFO" (Other types available)
CableSee "ORDERING INFO" (Other lengths available)
Mounting placeOn non-conductive vehicle roof etc.
Height above roof30 mm
Mounting holeMounting from inside: Ø 13 mm, Mounting from outside: Ø 19 mm
Build-in depthApprox. 12 mm
Ingress ProtectionIP65 (When mounted)
Ordering information:
Part no.16090 (3 m cable + FME-female)
Part no.16090IP (3 m cable + FME-female - Bulk packing)
Part no.16104 (4 m cable + FME-female)
Part no.16104IP (4 m cable + FME-female - Bulk packing)
Part no.16105 (0.1 m cable + FME-male)
Part no.16105IP (0.1 m cable + FME-male - Bulk packing)
Part no.16136 (5 m cable + FME-female)
Part no.16136IP (5 m cable + FME-female - Bulk packing)
Part no.16137 (1.5 m cable + FME-female)
Part no.16137IP (1.5 m cable + FME-female - Bulk packing)
Part no.16111IP (10 m cable + SMA-male - Bulk packing)
Part no.16192IP (3 m cable + SMA-male - Bulk packing)
Part no.16195IP (1.5 m cable + SMA-male - Bulk packing)
Part no.16408IP (10 m cable + FME-female - Bulk packing)
Packing information:
PackingPolybag or bulk
Lisainformatsioon
Vali bränd Scan-Antenna

Sending authentication request to phone

Kontrollkood:

Veenduge, et rakendusele saadetud kontrollkood ühtib ekraanil kuvatud koodiga ning sisestage Smart-ID PIN1

Smart-ID vastuse ootamine