Magnum AV-1KM CB6PIN PRO Handsfree Kit compatible with CB Radios using a 6-Pin connector

HandFree Kit for President CB Radio´s using a 6-Pin Mic Connector.
• Great for use in a excavator, crane, shovel, caterpillar or other machine 
• Use switch on joy-stick or foot switch to switch from RX to TX
• Connect the 2 wires from any switch to the terminal block
• Handsfree kit is powered from the transceiver through the microphone cable, no seperate DC power needed. Fused in the transceiver.
• Easy installation

Note: For President models; This device will funtion with all President CB transceivers that give audio from the internal speaker, even when the 6-Pin microphone is NOT plugged in.
Other cb brands and models
... that use same pin configuration
... that have audio without microphone plugged in
... that also have 12 Volt on Pin-6 (several brands use Pin-6 as hook lock - that will not function )
will ave same result.

FEATURES:
• HandFree Kit for many CB Radio´s using a 6-Pin Mic Connector.
• Great for use in a excavator, crane, shovel, caterpillar or other machine 
• Use switch on joy-stick or foot switch to switch from RX to TX
• Connect the 2 wires from any switch to the terminal block
• Handsfree kit is powered from the transceiver through the microphone cable,  no seperate DC power needed. Fused in the transceiver
• Easy installation
• For best result, install the wind cap on the microphone

CAUTION:
• If  the microphone mounts under the bulkhead bolt of the sun visor. Please make sure it is firmly attached and cable is safely routed.
• Please also make sure that the microphone is angled so it does not interface with your forward vision.

PACKING INCLUDES:
1 pc of Hands Free Kit