Truss - pipe mast MKR-8.5/CT

DESCRIPTION
The mast MKR-8.5/CT consists of a rigid and lightweight aluminium lattice, which can be entered by a qualified installer.

The mast, which does not require support cables, takes up little space and looks good.

The mast is designed for the installation of lightweight equipment such as surveillance cameras, Wi-Fi, LTE antennas or smaller radio links in the first wind zone (according to Polish EUROCODE standards). The downloadable technical calculations are for reference only for designers. The accompanying documentation should not be considered as installation instructions.

For more atypical installation locations and loads, we recommend that you contact us to check your technical requirements.

TECHNICAL DATA

• Mast height: 8.5 m
• Number of sections:
• 4 pieces - Truss mast,
• 2 pcs - Pipe mast
• Wall thickness: 1.5 mm
• Material: aluminium
• Construction: triangular cross-section trellis : 250 x 250 x 250 mm.
• Support beams : Aluminium tube Ø 35 mm.
• Basic characteristics:
  No support cables required
  The mast can be mounted by means of the MK-1.5/POD base.
  A person weighing up to 100 kg can enter the mast in winds of less than 5 m/sec.
  Can be transported in the boot of a passenger car.
  After packing, the dimensions of the product are such that it can be shipped by courier across Europe.
• Weight:
  4 x 5.05 kg - Grille mast.
  2 x 0.72 kg - Pipe mast
  1.56 kg - Pipe clamp OR3-50W6
  3.01 kg - Pole base
  1.6 kg - Concrete anchor
• Warranty: 2 years