iProtect 1215 Microwave pointer 4-12 GHz

It is possible that foes can spy on you using radio microphones working on ‘stealth’ microwave frequency bands. Conventional RF detectors are typically capable of discovering signals up to 4-6 GHz; therefore higher frequencies usually stay unstudied during sweeping procedures, unless you apply an expensive spectrum analyzer.

The new microwave pointer-probe iProtect 1215 was designed to extend the checked frequency range during sweeping procedures up to 13 GHz. It can find surveillance bugging devices which are usually not detectable by standard RF detectors. The directed antenna allows the operator to understand where the signal originates from and, as such, to locate the source physically.

Particular attention should be paid to the 5.8GHz ISM band on which a number of wireless devices can be active without being discovered by conventional RF detectors at a sufficient distance

Typical signals detected by iProtect 1215 are

• Wireless microphones working on 5 GHz frequency band
• Wireless video cameras 5GHz
• Covert 5GHz Wi-Fi access point
• Covert 5GHz Wi-Fi client device
• Other surveillance (bugging devices) employing frequencies between 4-13 GHz

Features

• Detects bugging devices omitted by standard RF detectors
• Discovers microwave signals in the range of 4-13 GHz
• Detects signals not depending on their type – video, audio, digital or analogue
• Built-in directed antenna
• 3 working modes: Normal, Vibrating and Audio
• 16-segment indicator for easy and precise pinpointing of the bugging device
• Sensitivity controlled by attenuator
• Antenna’s directivity (out-of-direction attenuation) -6 dBm
• Portable and durable duralumin body
• Powered by just 1 AA (LR06) battery
• Low power indication
• Battery resource 12-25 hours

Specification

• Frequency range: 4 - 13GHz
• Controls: Power button; Mode button; ATT button
• Indicators: 16-segment bargraph; Vibration; Battery state (3 colors); Working mode; ATT state
• Batery recource: 12-25 hours
• Dimensions: 172 x 19 mm
• Current consumption: Normal - 80 mA; Vibrating - 180 mA; Audio - 130 mA
• Power source: 1 x AA battery (LR06)